EasyManua.ls Logo

Mitsubishi Lancer Evolution VI - Sensor Relay <Vehicles with Ayc

Mitsubishi Lancer Evolution VI
447 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REAR AXLE Sensor Relay <Vehicles with AYC>
27-41
SENSOR RELAY <VEHICLES WITH AYC>
REMOVAL AND INSTALLATION
Caution: SRS
For vehicles with SRS, before removal of air bag module and clock spring, refer to GROUP 52B
Service Precautions and Air Bag Module and Clock Spring.
1
2
3
4
Steer sensor removal steps
D Steering wheel and column cover
AA" 1. Steer sensor
Acceleration sensor and AYC relay
removal
2. Longitudinal acceleration sensor
3. Lateral acceleration sensor
4. AYC relay
NOTE
For the wheel speed sensor, refer to GROUP 35B.
REMOVAL SERVICE POINT
AA" STEER SENSOR REMOVAL
Remove the steer sensor from the column switch.
Caution
(1) A photocoupler is used as the steer sensor. Use care
not to allow dust or grease to be on the sensor.
(2) Do not bend or dirty with grease the slit plate on
the column switch side.
Slit plate
Steer sensor

Table of Contents

Other manuals for Mitsubishi Lancer Evolution VI

Related product manuals