STEERING – Power Steering Gear Box
37A-17
INSPECTION
RACK CHECK
D Check the rack tooth surfaces for damage or wear.
D Check the oil seal contact surfaces for uneven wear.
D Check the rack for bends.
PINION AND VALVE ASSEMBLY CHECK
D Check the pinion gear tooth surfaces for damage or wear.
D Check for worn or defective seal ring.
BEARING CHECK
D Check for roughness or abnormal noise during bearing
operation.
D Check the bearing for play.
D Check the needle roller bearing for roller slip-off.
OTHER CHECK
D Check the cylinder inner surface of the rack housing for
damage.
D Check the boots for damage, cracking or deterioration.
D Check the rack support for uneven wear or dents.
D Check the rack bushing for uneven wear or damage.
To Next Page
Loading...
