Changing the function of the F1 or F2 switch can be performed with the F1/F2 function setting (☞page 63).
The following functions are set as factory settings.
You may change these settings as desired.
F1
switch …High power operation
F2
switch …Energy-saving operation
F1/F2 switch operation
You can set any of the following functions to the F1 and F2 switches.
The F1
/ F2 switches act as shortcuts; it can be much easier and faster than starting an operation from the
usual Menu
on the TOP screen.
・High power operation …☞page 14
・Energy-saving operation …☞page 15
・Silent mode control …☞page 64
・Home leave mode …☞page 46
・Favorite setting operation …☞page 50
・Filter sign reset …☞page 65
1
Tap the
Change the fan speed
button on the TOP screen.
2
When the Change the fan speed screen is displayed, tap the button
of desired fan speed.
After setting the fan speed, the display returns to the TOP screen.
■Fan speeds which can be set vary depending on the models of IU.
■When the
Auto is selected, the fan speed is changed automatically
depending on the capacity.
Note that
Auto is not displayed and cannot be set when SC-SL2 or SC-
SL3 is connected.
Change the fan speed
Menu
Direction
Cooling
16：14
(Mon)
F1: High power F2: Energy-saving
Timer
Now stopping.
Set temp
Change the fan speed
Back
OutdoorRoomR/C
Select the fan speed.
Auto
To Next Page
Loading...
Need help?
General
