Mitsubishi RC-EX3 User Manual

－ 22 －
1
Tap the
Menu
button on the TOP screen and select
Energy-saving setting ⇒ Peak-cut timer
.
When the setting range selection screen for the peak-cut timer is
displayed, select the day of the week to be set.
①
Weekdays : Monday - Friday
②
Sat. Sun : Saturday, Sunday (
☞
4)
③
All days : Monday - Sunday
④
Each day : Moves to the day of the week setting screen. (
☞
2)
2
If a desired day of the week
①
is tapped on the display, contents of
current setting for the day are displayed.
(
☞
5)
3
For the holiday setting, tap the block
②
under a day to switch
between “
” (the holiday setting) and “(Blank)” (reset).
Timer does not operate on the day set as holiday.
Two or more holidays can be set.
■To enable the timer on the day set as holiday, it is necessary to reset the holiday
setting.
4
When tapping
③
“All Disable” button, the timer does not operate on
all days of the week.
When the timer is used, be sure not to set “All Disable”.
■Peak-cut timer
Set the times to start and stop the capacity (upper limit) limiting operation and the peak-cut %.
· When the peak-cut timer is used, be sure to make the Clock setting in advance (☞page 33).
· The peak-cut timer control may not be performed depending on combination of IU and OU.
Advice
Peak-cut timer
Each day
Back
Select the item.
Sat, SunWeekdays
All days
3
1
4
2
2
Peak-cut timer
Select the day of the week.
Invalid Setting:Tap box below day of week.
If invalid is selected, timer won't start
All Disable
Mon Tue Wed Thu Fri Sat Sun
Back
3
1

Mitsubishi RC-EX3 Specifications

General

Brand	Mitsubishi
Model	RC-EX3
Category	Remote Control
Language	English