8
Set the fan speed in heating mode.
Tap a desired fan speed.
9
After the settings of steps 3 to 8, the display returns to the Details setting menu 1.
Tap the
Back
button to return to the home leave mode screen. To start operation, tap the
Start
button.
Fan speed rule in heating
Back
Select the fan speed.
1
On the TOP screen, set the desired operation mode, set temp, fan
speed, and ap direction.
Tap the
Menu
button on the TOP screen and select
Useful functions
⇒
Favorite setting
.
The administrator password input screen is displayed.
Enter the administrator password.
■ You cannot register the favorite settings during high power and energy-saving
operations.
2
The save location selection screen for favorite settings is displayed.
Select the save location.
If there is any data that was previously saved, that data will be
overwritten.
Registering favorite settings
Operation mode, set temp, fan speed, fan direction can be registered as Favorite set 1 and Favorite set 2.
Allocating these settings to the
F1
and
F2
switches allows you to perform operations with these registered
settings with a single tap of the button (
☞
page 63).
Refer to the F1/F2 function setting (
☞
page 63) on how to set the
F1
and
F2
switches.
Favorite set 2Favorite set 1
Favorite setting
Back
Saving current state of operation
Saving where?
To Next Page
Loading...
Need help?
General
