Mitsubishi RC-EX3 User Manual

－ 64 －
1
When you press the
F1
(
F2
) switch, the administrator password input screen is displayed.
After you enter the password, the silent mode control will start.
2
During silent mode control, “Outdoor unit silent mode control ON”
will be displayed on the message display.
3
When you press the
F1
(
F2
) switch during silent mode control, the display changes to the administrator
password input screen. After you enter the password, the silent mode control will terminate.
■Silent mode control will not be disabled even if you press the
Run/Stop
switch.
Terminate the control with the
F1
(
F2
) switch.
■This operation is to select enable/disable of silent mode control. You cannot start the operation with the
F1
(
F2
) switches.
Start the operation with the
Run/Stop
switch.
■When the sub R/C is set, the silent mode control cannot be used.
■During silent mode control, operation with maximum capacity is not allowed.
Silent mode control
The OU is controlled with priority on quietness. You can start/stop the silent mode control with a single tap of a button.
Silent mode control must be set to the
F1
or
F2
switch (
☞
page 63). Use the Outdoor unit silent mode timer
to set the start and end time (
☞
page 53).
Menu
Direction
Auto
16：00 (Mon)
F1: Silent mode cont F2: Home leave mode
Timer
Outdoor unit silent mode control ON
Set temp
MEETING1
Room

Mitsubishi RC-EX3 Specifications

General

Brand	Mitsubishi
Model	RC-EX3
Category	Remote Control
Language	English