Mitsubishi RC-EX3

－ 37 －
1
Tap the
Menu
button on the TOP screen and select
User setting ⇒ Initial settings ⇒
Operation lamp luminance
.
2
The Operation lamp luminance adjustment screen is displayed.
You can adjust the luminance of the operation lamp to a desired
level by tapping the
▲ Light
/
▼ Dark
button.
3
After you make the settings, tap the
Set
button.
■Operation lamp luminance
You can adjust the operation lamp luminance.
1
Tap the
Menu
button on the TOP screen and select
Useful functions ⇒ Timer
2
Tap a desired item on the Timer menu.
・
Set ON timer by hour ……
☞
page 39
・
Set OFF timer by hour ……
☞
page 40
・
Set ON timer by clock ……
☞
page 41
・
Set OFF timer by clock ……
☞
page 41
・
Conrm ……
☞
page 42
When the timer is set, the
Confirm
button is displayed.
The button is not displayed unless the timer is set.
Timer
· The Clock setting (☞page 33) must be made when the Set ON timer by clock or Set OFF timer by clock is used.
Advice
Timer
Set ON timer by hour
Set OFF timer by hour
Set ON timer by clock
Set OFF timer by clock
Confirm Back
Select the item.
Operation lamp luminance
Back
Use ▲▼ to adjust light and dark.
Set
▲
Light
▼
Dark