■Permission/Prohibition setting
1
Tap the
Menu
button on the TOP screen and select
User setting
⇒
Administrator settings
⇒
Permission/Prohibition setting
. The Permission/Prohibition setting menu is displayed.
2
Following items can be selected, and the Permission or Prohibition
can be set for them.
If the Permission is set, the operation is accepted.
If the Prohibition is set, the message “Invalid request” is displayed
for 3 seconds.
Some items may require the administrator password.
■Operation with Prohibition setting
①
Bat.set .... Can set to permit/prohibit all items from
②
to
⑬
at
once.
②
Run/Stop … Run/Stop operation is prohibited.
③
Change set temp … Change set temp operation is prohibited.
④
Change operation mode … Change operation mode operation is prohibited.
⑤
Change ap direction … Change ap direction operation is prohibited.
⑥
Individual ap control … Administrator password is required for this control.
⑦
Change the fan speed … Change fan speed operation is prohibited.
⑧
High power operation … High power operation is prohibited.
⑨
Energy-saving operation … Energy-saving operation is prohibited.
⑩
Timer … Timer setting operation is prohibited.
⑪
Weekly timer … Administrator password is required for these settings.
⑫
Select the language … Administrator password is required for this selection.
⑬
Anti draft setting ... Administrator password is required when setting anti
draft.
Permission/Prohibition setting
Weekly timer
Select the language
Anti draft setting
Back
Select the item.
Previous
Permission/Prohibition setting
Bat.set.
Run/Stop
Change set temp
Change operation mode
Change flap direction
Next Back
Select the item.
Permission/Prohibition setting
Individual flap control
Change the fan speed
High power operation
Energy-saving operation
Timer
Next Back
Select the item.
Previous
To Next Page
Loading...
