2Unpacking to Installation
Confirming the product
2-5
2 Unpacking to Installation
2.1 Confirming the product
The standard configuration of the robot arm, part of the purchased product, is shown in Table 2-1.
Confirm the parts.
Users who have purchased optional products should refer to the separate "Standard Specifications".
Table 2-1：Standard configuration
Note） The number 3 - 6 are in the plastic bag of the robot arm attachment.
No. Part name Type Qty. Remarks
1 Robot arm RV-2A, RV-2AM,
RV-2AC-SA/SB
RV-3AJ, RV-3AJM,
or
RV-3AJC-SA/SB
Either
1 unit
2 Guarantee card 1 copy
3 Installation bolts M8x30 4 pcs.
For robot arm installation4 Spring washer for installation bolts For M8 4 pcs.
5 Plain washer for installation bolts For M8 4 pcs.
6 Marking seals 12 pcs.
To Next Page
Loading...
