No. 99MAF029B
ix
3.1.2
Continuously Measuring the Distance from One Specific Point to Multiple Other Points
…33
3.1.3 Calculating the Difference Between Values Stored in the Memory ……………………35
3.2 Judging the Tolerance ………………………………………………………………38
3.2.1 Setting the Upper and Lower Limits ………………………………………………………38
3.2.2 Enabling/Disabling the Judgment Function ………………………………………………39
3.3 Simplifying Measurement Procedures ……………………………………………40
3.3.1 Registering a Measurement Procedure ……………………………………………………40
3.3.2 Measuring Using a Registered Measurement Procedure ………………………………42
3.4 Setting the Terminating Method for Scanning Measurements …………………43
3.5 Holding the Displayed Measurement Results ……………………………………44
3.6 Setting the Resolution for Measurements ………………………………………44
3.7 Setting the Time Until the Power Turns Off (Auto-Off) …………………………45
3.8 Setting the LED Lighting Time ……………………………………………………46
3.9 Outputting Measurement Results to an External Device ………………………47
3.9.1 Outputting to a Mini Printer (Optional Accessory) ………………………………………47
3.9.2 Outputting to a PC (Windows Only) ………………………………………………………48
4 Troubleshooting …………………………………………………………………………51
4.1 If the Following Problem Occurs …………………………………………………51
4.2 If Error Messages Are Displayed …………………………………………………53
5 Specifications ……………………………………………………………………………55
5.1 Basic Specifications …………………………………………………………………55
5.2 Digimatic Data Output Specification ………………………………………………57
5.2.1 Data Format …………………………………………………………………………………57
5.2.2 Connector Specification ……………………………………………………………………57
5.2.3 Timing Chart …………………………………………………………………………………58
5.3 USB Data Output Specification ……………………………………………………59
5.3.1 Communication Specification ………………………………………………………………59
5.3.2 Data Format …………………………………………………………………………………59
5.3.3 Connector Specification ……………………………………………………………………59
5.3.4 Data Format Examples………………………………………………………………………59
5.4 Accessories …………………………………………………………………………60
5.5 Optional Accessories ………………………………………………………………61
SERVICE NETWORK
Revision History
To Next Page
Loading...
Need help?
General
