39
3 Specific Usage Applications
No. 99MAF029B
4
Repeatedly press until the 2nd value from the right flashes.
5
Press or to display [1], and then press .
»
[L] and the current lower limit will be displayed on the LCD screen.
6
Press to make [–] flash.
If [+] is displayed, press or to change the display to [–].
7
Display [5] in the thousandths place using the same procedure described in steps
4
and
5
, and
press
.
»
Setup is complete.
3.2.2 Enabling/Disabling the Judgment Function
1
Press .
»
Characters and icons will be displayed in the bottom row of the LCD screen.
2
Press to select [TOL.] (tolerance setting).
»
[U] and the current upper limit will be displayed on the LCD screen.
3
Press .
4
Press or , to select [toL.on] (enabled) or [toL.oFF] (disabled), and then press .
5
Press .
To Next Page
Loading...
Need help?
General
