49
3 Specific Usage Applications
No. 99MAF029B
Sending the measurement results to your PC
1
Connect the product to your PC using a commercially available micro USB cable.
Tips
When the cable is plugged in, the product is in the USB communication state, which depletes the
battery. Remove the cable when not in use.
2
Start up communication software such as Hyper Terminal on the PC.
Tips
The communication setups for the communication software should be subject to "5.3.1
Communication Specification" (page 59).
3
Make a measurement.
»
The measurement results will be automatically sent to the PC.
Tips
• For details about measurement methods, "2 Basic Measuring Methods" (page 17)
• You can also send the measurement results by pressing
.
To Next Page
Loading...
