© MOBATIME 44 / 120 800652.11
Channel state:
Display of all 64 channels of the switch functions. A switched on channel is displayed
with an [*]. [ ] shows a locked channel in a switched off state whereas [*] shows a
switched on channel in a locked state.
An ! shows that the channel is linked to a control output.
An s shows that the channel is linked to the twilight calculation.
By entering a channel, the page can be changed to that of manual switching for that
channel:
After a restart or after changing the program file, it can take up to 2 min until the states
displayed correspond to the effective states on the channel relay.
To Next Page
Loading...
