Mold-Masters TempMaster M2 Plus Series User Manual

7.6.3 Logout Time .............................................................................................7-11
7.6.4 Import User List .......................................................................................7-12
7.6.5 Export User List .......................................................................................7-12
7.7 Congure a Network Connection ...................................................................... 7-13
7.7.1 Congure a Wired Connection.................................................................7-13
7.7.2 Congure a Wireless Network .................................................................7-16
7.7.3 Add Hidden Wireless SSID ......................................................................7-17
7.8 Share Files on a Network .................................................................................7-18
7.9 Linked Controllers ............................................................................................. 7-20
7.10 Multiple Consoles Using Master IP Address ................................................... 7-20
Section 8 - Maintenance...................................................8-1
8.1 Upgrade Software ............................................................................................... 8-1
8.2 Check Touchscreen Alignment ...........................................................................8-4
8.3 Self Diagnostic Tests ..........................................................................................8-7
8.3.1 Fast Test ..................................................................................................8-10
8.3.2 Full Test ...................................................................................................8-10
8.3.3 Power Test ............................................................................................... 8-11
8.4 Interpret the Test Results ..................................................................................8-11
8.4.1 Satisfactory Test ...................................................................................... 8-11
8.4.2 Unsatisfactory Test .................................................................................. 8-11
8.5 System Diagnosis Error Messages ..................................................................8-13
8.6 Print the Test Results ........................................................................................8-14
8.7 Training and Demonstration Mode ...................................................................8-15
8.7.1 Enter or Leave Demo Mode .....................................................................8-15
8.8 Remove or Reconnect the Console .................................................................. 8-17
8.8.1 Remove the Console ...............................................................................8-17
8.8.2 Reconnect the Console ...........................................................................8-19
8.9 Service and Repair The Controller ...................................................................8-21
8.9.1 Replacement Parts ..................................................................................8-21
8.9.2 Cleaning and Inspection ..........................................................................8-21
8.10 Fuses and Overcurrent Protection .................................................................. 8-23
8.10.1 Replacement Fuses ...............................................................................8-23
8.10.2 Console Fuse .........................................................................................8-23
8.10.3 Power Supply Unit Fuse ........................................................................8-23
8.10.4 Fan Fuse ................................................................................................8-23
8.10.5 Controller Card Fuses ............................................................................8-24
Section 9 - Troubleshooting ............................................9-1
9.1 Controller Card Indicators ................................................................................... 9-1
9.3 Beacon and Sounder Extension .........................................................................9-2
9.2 System Warning Messages ................................................................................9-2
9.4 Fault and Warning Messages .............................................................................9-3
Section 10 - Hot Runner Controller Wiring Details ..... 10-1
10.1 Three Phase Designation - Star / Delta Option ..............................................10-1
10.2 Connect the Star / Delta Option ..................................................................... 10-2
10.2.1 Set Power Rail to Star Conguration .....................................................10-2
10.2.2 Star Supply Wiring .................................................................................10-3
v
© 2021 Mold-Masters (2007) Limited. All Rights Reserved.
M2+ Controller User Manual

Mold-Masters TempMaster M2 Plus Series Specifications

General

Brand	Mold-Masters
Model	TempMaster M2 Plus Series
Category	Controller
Language	English