0112-0127 B 113
4
Maintenance
This chapter provides procedures for regular maintenance that the
FlexStation 3 instrument needs.
• Obtaining Support, see page 114
• Moving the Instrument, see page 114
• Cleaning the Instrument, see page 115
• Using the Microplate Adapters, see page 120
• Using the Compound Baseplate, see page 121
• Replacing Fuses, see page 121
• Replacing the Flash Lamp, see page 123
• Long-Term Shutdown, see page 128
Service-Trained Users: Whenever the following warning message
appears, a service-trained user must perform the procedure to ensure
user safety and to prevent instrument damage.
Example:
WARNING! All maintenance procedures described in this user guide
can be safely performed by qualified personnel. Maintenance not
covered in this user guide should be performed only by a Molecular
Devices representative.
WARNING! Turn off the power switch and disconnect the power cord
from the main power source before performing any maintenance
procedure that requires removal of any panel, cover, or disassembly of
any interior instrument component.
WARNING! The following procedures must be completed by a
service-trained user. Do not attempt the following procedures if you
have not been trained properly by appropriate Molecular Devices
personnel.
FlexStation_manual.book Page 113 Tuesday, June 25, 2013 10:22 AM
To Next Page