FlexStation 3 Benchtop Multi-Mode Microplate Reader User Guide
50 0112-0127 B
Unpacking the System
This section provides instructions on how to unpack the system safely.
Each FlexStation 3 instrument comes with the following components.
• Fluidics module and accessories
• Detection module (main instrument body) in housing
• Computer (can be user-supplied)
• Computer monitor (can be user-supplied)
• SoftMax Pro Software package
Please retain the cartons, all boxes, and any significant packing materials.
If the system needs to be moved to a different location, use the original
packing materials and cartons whenever possible. If the cartons have
been damaged in transit, it is particularly important that you retain them
for inspection by the carrier in case there has also been damage to the
instrument.
As you unpack the system components, examine the packing list that
accompanies the system to be sure all items are present.
CAUTION! Do not touch or loosen any screws or parts other than those
specifically designated in the instructions. Doing so might cause
misalignment and will void the system warranty.
CAUTION! Do not attempt to assemble or disassemble the instrument
with the pipette tips or compound and read plates in place. Spillage or
damage to the pipette tips, plates, or the instrument can occur.
WARNING! The instrument weighs approximately 50 pounds and
should be lifted with care. To prevent injury, use at least two people to
lift the instrument.
FlexStation_manual.book Page 50 Tuesday, June 25, 2013 10:22 AM
To Next Page
Loading...
Need help?
General