0112-0127 B 129
5
Troubleshooting Procedures
This chapter provides instructions for troubleshooting problems that can
occur with the FlexStation 3 instrument.
• Problems During Startup, see page 130
• Opening a Drawer Manually, see page 132
• Understanding Potential Mechanical Problems, see page 133
• Recovering from Mechanical Problems in Flex Mode when Using
Fluidics, see page 135
• General Error Messages, see page 147
• Tilting or Removing the Fluidics Module, see page 149
Note: These troubleshooting instructions address only those problems
that can occur with the fluidics operation of the instrument. They do
not address problems with the flash lamp or the detector, or error
messages related to missing data or saturated data points. If you need
to contact Molecular Devices Technical Support, see
Obtaining Support
on page 114.
FlexStation_manual.book Page 129 Tuesday, June 25, 2013 10:22 AM
To Next Page
Loading...