FlexStation 3 Benchtop Multi-Mode Microplate Reader User Guide
86 0112-0127 B
SoftMax Pro Software Parameters for Fluid Transfer
In addition to defining the parameters to be used during a read, the
FlexStation 3 instrument includes distinct parameters only available for
use with the integrated pipettor. It is essential that settings for the
fluidics operations are correct and correlate with one another. In
particular, layouts and settings for Assay Plate Type, Wells to Read,
Compound Source, Compound Transfer, and Compound & Tip Columns
must correlate.
The SoftMax Pro Software cross-checks these settings as you move
through the configuration windows, and after you click OK to close the
Instrument Settings dialog. If settings do not correlate, an error message
appears, and you must correct the settings before continuing.
The following sections describe the available fluid-transfer settings.
• Compound Source, see page 87
• Compound Transfer, see page 88
• Triturate Selection, see page 92
• Compound and Tip Columns, see page 93
• Pipette Tip Air Gap, see page 97
FlexStation_manual.book Page 86 Tuesday, June 25, 2013 10:22 AM
To Next Page
Loading...
Need help?
General