Molecular Devices FlexStation 3 User Manual

FlexStation 3 Benchtop Multi-Mode Microplate Reader User Guide
78 0112-0127 B
SoftMax Pro Software Parameters
In addition to the settings discussed in Setting Up the Software on
page 75, there are several other parameters to select when reading a
microplate. Listed under Setup in the SoftMax Pro Software, these reader
parameters can and should be adjusted to get the best data from your
particular assay. Some of the parameters are discussed here in the
FlexStation 3 instrument User Guide, and they are discussed in more
detail in the SoftMax Pro Software User Guide. All possible combinations
of type, mode, and parameter are not presented here, but Molecular
Devices technical support is always available to help you achieve the best
possible results.
Refer to the following sections for considerations when setting up for a
specific read.
• Read Types, see page 79
• Read Modes, see page 79
• Wavelengths, see page 80
• Sensitivity, see page 80
• Timing, see page 81
• Assay Plate Type, see page 82
• Wells to Read, see page 83
• Automix, see page 84
• AutoCalibrate, see page 85
• Settling Time, see page 85
• AutoRead, see page 85
FlexStation_manual.book Page 78 Tuesday, June 25, 2013 10:22 AM

Molecular Devices FlexStation 3 Specifications

General

Brand	Molecular Devices
Model	FlexStation 3
Category	Card Reader
Language	English