FlexStation 3 Benchtop Multi-Mode Microplate Reader User Guide
22 0112-0127 B
You can open and close the drawers using either the SoftMax Pro
Software or by pressing the drawer keys on the instrument control panel.
Using the SoftMax Pro Software, open the Control menu and click Tip
Drawer for the tip rack drawer, Compound Drawer for the compound
plate drawer, or Open Drawer for the reading chamber drawer.
Figure 1-11: SoftMax Pro Software Control Menu
You can also open or close the reading chamber drawer with the Drawer
button on the Status Bar.
Figure 1-12: SoftMax Pro Software Drawer Button
CAUTION! Do not obstruct the movement of any of the drawers. If you
must retrieve a plate after an error condition or power outage, and if the
drawer will not open, it is possible to open the drawer manually. See
Opening a Drawer Manually on page 132.
FlexStation_manual.book Page 22 Tuesday, June 25, 2013 10:22 AM
To Next Page
Loading...
Need help?
General