Description
0112-0127 B 25
Pipettor Head
The instrument is configured with an 8-channel pipettor head for use
with 96-well microplates or a 16-channel pipettor head for use with 384-
well microplates.
Figure 1-14: Pipettor Head
See
Installing the Pipettor Head on page 56.
The barrels on the pipettor head require periodic cleaning to remove
silicone lubricant, dust, and other miscellaneous contamination. See
Cleaning the Barrels on the Pipettor Head on page 117.
FlexStation_manual.book Page 25 Tuesday, June 25, 2013 10:22 AM