molex Brad HarshIO 600 eIP - Ethernet Connectors and Encoding Switches

HarshIO 600 eIP
•
25
•
IP67 IO-Link Modules for EtherNet/IP
Ethernet connectors and encoding switches
Pinout and orientation
Note!
Shell of each connector (FE1 & FE2) is connected to its own FE screw tab.
Note!
M12 Ethernet connector shall be screwed with a torque of 2.0 Nm to ensure a correct
sealing to achieve IP67 rating.
Ethernet LEDs
LED
Color State
Meaning
LINK ETH
Fixed yellow
10MB* + No Activity
Blinking yellow
10MB* + Activity
Fixed Green
100MB + No Activity
Blinking Green
100MB + Activity
(*): 10MB is not supported (100MB only)
Pin
Description
1
TX+
2
RX+
3
TX-
4
RX-
Link ETH1 indicator
Link ETH2 indicator
No LED - black light-pipe only