Moneris Go Plus - Restart; Power off

Moneris® Go Plus: Using Your Terminal 10
Restart
1. Ensure that the terminal is not connected to a power source. If needed:
 Unplug the charging cable from the terminal; or
 Undock the terminal from the optional charging base.
2. Locate the power button on the left side of the terminal. Press the button until you see the menu on the
right side of the screen.
A screen appears with five options: Power off, Restart, Screenshot, Services and Base.
3. Tap Restart.
The screen displays “Restarting …”
4. The terminal shuts down and restarts.
Power off
1. Ensure that the terminal is not connected to a power source. If needed:
 Unplug the charging cable from the terminal; or
 Undock the terminal from the optional charging base.
2. Locate the power button on the left side of the terminal. Press the button until you see the menu on the
right side of the screen.
A screen appears with five options: Power off, Restart, Screenshot, Services and Base.
3. Tap Power off.
The screen displays “Shutting down…”
4. The terminal powers off.