Moog Infinity User Manual

© Copyright 2020 Moog, Inc.
27
Battery Doesn’t Hold Its Charge
Battery will lose its charge if stored for a long period of time or if stored
at high temperatures (such as in an automobile during summer).
To correct the problem: Recharge the battery. If the problem continues
during regular use, contact your healthcare provider for service.
Battery Doesn’t Charge
If the battery symbol and the E and F of the fuel
gauge (Figure 3-13) are ashing while the pump
is plugged in, the battery is not charging.
To correct the problem: Contact your
healthcare provider for service.
Charger Installed but No Plug Symbol Visible
If the plug symbol does not display
after the AC Adapter/Charger is plugged into pump and a live
power outlet, then charger is not charging battery.
To correct the problem: Check the following:
4 Verify that the wall outlet works by plugging in
another appliance, such as a lamp.
4 Charger is connected properly.
If this does not correct the problem, pump or charger may be
damaged. Contact your healthcare provider for service.
NOTE: There are no user serviceable or replaceable components inside the Innity.
Figure 3-13 Battery Symbol and
the E and F of the Fuel Gauge
3. ALARMS, MESSAGES, AND INDICATIONS

Moog Infinity Specifications

General

Model	Infinity
Type	Infusion Pump
Occlusion Pressure Settings	Low, Medium, High
Alarms	Occlusion, Low battery
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 60°C
Manufacturer	Moog
Infusion Modes	Continuous, Intermittent
Display	LCD
Compatibility	Standard infusion sets