____________________________________________________________________
_______________________________________________________________________
MN0090-05 Page 45 of 68 18008
MPT-90 PRODUCT MANUAL This document contains U.S. export controlled technical data as regulated by the U.S. Export Administration Regulations 15 CFR Parts 730-774, export, disclosure or transfer contrary to U.S. law is prohibited.
5) Double click on “Internet Protocol Version
4 (TCP/IPv4) to open Internet Protocol
Version 4 (TCP/IPv4) Properties.
6) Within the Internet Protocol Version 4 (TCP/IPv4) Properties panel,
select “Use the following IP address:” and type in the following:
IP address 192.168.1.9 Subnet mask: 255.255.255.0
Default gateway 192.168.1.1 Click OK to save and exit.
7) Open a web browser and type in the IP address of the positioner
(192.168.1.10) into the web browser’s address bar.
NOTE:
Some versions of Microsoft Internet Explorer have issues rendering
HTML5 and will no open the page correctly. Use Google Chrome, or
Mozilla Firefox.
8) The positioner’s web interface should open.
To Next Page
Loading...