To enter a space, move the cursor to the last line and position the cursor over the blank space following the last
letter. Press the Enter key to input a space in the patient ID.
To delete a letter or digit in the patient ID, position the cursor over Del on the bottom line. Press the Enter key to
delete the last letter or digit entered in the patient ID.
To end patient ID entry, position the cursor over End on the bottom line. Press the Enter key to store the patient ID
in the patient record.
Configuring Date/Time and Language
CONFIGURE is used to set the current date and time, the date format and language defaults and to display the
software version number. These settings typically are set before the initial patient recording on the H12+ and do not
need to be set on a per patient basis.
From the Main menu, scroll to CONFIGURE using the Down or Up key. Press the Enter key to select this option.
The Configure menu includes the following options.
DATE/TIME
LANGUAGE
VERSION
DONE
Use the Down or Up key to scroll through the Configure menu options. Press the Enter key when the desired
option is displayed. Select Done and press the Enter key to return to the Main menu.
On the next page, an operational flowchart of Configure menu options depicts the flow of functionality via the Up,
Down and Enter keys.
To Next Page
Loading...
