Setting Date and Time
DATE/TIME is used to set the current date and time and to set an alternative format for the displayed date.
From the Configuration menu, scroll to DATE/TIME using the Down or Up key. Press the Enter key to select this
option. The Date/Time menu includes the following options.
SET MINUTE
SET HOUR
SET DAY
SET MONTH
SET YEAR
FORMAT
DONE
Use the Down or Up key to scroll to the desired option and press the Enter key. The current values for this option
are displayed on the LCD screen.
When setting the date or time, increase the value by pressing the Up key. To decrease the value, press the Down
key. When the correct value is displayed on the screen, press the Enter key.
Note: A SET SECONDS option does not exist because seconds are reset each time a value is changed. If you
want to reset the seconds, set the minutes first. Press the Enter key at the instant you want the seconds to be
reset.
FORMAT provides two options for the date format: month/day/year or day.month.year.
From the Configuration menu, scroll to FORMAT using the Down or Up key. Scroll from one option to the other
by using the Down or Up key. Press the Enter key to select the desired date format and return to the Configure
menu.
To return to the Configure menu, scroll to DONE using the Down or Up key and press the Enter key.
Setting Language
LANGUAGE is used to select a language to view the Main menu and all sub-menu options.
From the Configuration menu, scroll to LANGUAGE using the Down or Up key. Scroll through the language
options using the Down or Up key. Press the Enter key to select the desired language and return to the Configure
menu.
To Next Page
Loading...
