Notices
Manufacturer’s Responsibility
Mortara Instrument, Inc., is responsible for the effects on safety and performance only if
Assembly operations, extensions, re-adjustments, modifications or repairs are carried out by persons authorized by
Mortara Instrument,
The electrical installation of the relevant room complies with the requirements of appropriate regulations, and
The H12+ Holter Recorder is used in accordance with the instructions for use.
Responsibility of the Customer
The user of this product is responsible for ensuring the implementation of a satisfactory maintenance schedule.
Failure to do so may cause undue failure and possible health hazards.
Equipment Identification
Mortara Instrument equipment is identified by serial numbers on the back or bottom of the device. Care should be
taken so that these numbers are not defaced.
Information pertinent to tracking and manufacturing is found on the product and may be called upon if service of the
device is required.
Copyright and Trademark Notices
This document contains information that is protected by copyright. All rights are reserved. No part of this
document may be photocopied, reproduced or translated to another language without prior written consent of
Mortara Instrument, Inc. The information contained in this document is subject to change without notice.
Other Important Information
The information in this document is subject to change without notice.
Mortara Instrument, Inc., makes no warranty of any kind with regard to this material, including, but not limited to
implied warranties of merchant ability and fitness for a particular purpose. Mortara Instrument, Inc., assumes no
responsibility for any errors of omission in this document. Mortara Instrument makes no commitment to update nor
to keep current the information contained in this document.
To Next Page
Loading...
