Motorola APX 2000 Detailed Service Manual

Troubleshooting Tables: List of Board and IC Signals 7-31
Note:
* PU = Pull Up
* PD = Pull Down
tdi JTAD Data in from JTAG
box to Controller
Y19 Input Input Pull-
down
nemu0 "Emulation pin 0, not
used, pulled high on
PCB
"V16 I/O Input Pul-
lup
nemu1 "Emulation pin 1, not
used, pulled high on
PCB
"W17 I/O Input Pul-
lup
Table 7-10. Overall GPIO pin functions (Continued)
Signal Name Description
Pin
or
Ball #
Active
State
SW Initialized HW Reset
Direction
*
PU State Direction
*
PU
or
PD

Motorola APX 2000 Specifications

General

IP Rating	IP67
Operating Temperature	-30°C to +60°C
GPS	Optional
Bluetooth	No
Frequency Range	700/800 MHz
Power Output	1-5 W (VHF), 1-3 W (700/800 MHz)
Channels	Up to 1, 000
Battery Life	Up to 10 hours (digital)
Digital Protocol	APCO P25
Frequency	VHF: 136-174 MHz, UHF: 380-470 MHz, 700/800 MHz: 764-870 MHz
Power	1-3W (700/800 MHz), 1-5W (VHF)