34
General Radio Operation
Use the Preprogrammed Monitor Button
1 Turn the radio on and select
the desired zone and
channel.
2 Press the Monitor button
and listen for activity. The
Carrier Squelch indicator is
displayed. (See the following
Conventional Mode
Operation.)
3 Adjust the Volume Control
Knob if necessary.
4 Press and hold the PTT
button to transmit.
The LED lights RED while
transmitting.
5 Release the PTT button to
receive (listen).
C
94C06.book Page 34 Wednesday, June 23, 2010 11:41 AM
To Next Page
Loading...
