102
ARS User Login and Text Messaging Features
Send a Predefined Message
The Quick Text Messages are messages that are predefined and
usually consist of messages that are used most frequently.
Note: When you receive a message on the XTS 2500 radio that
is flagged with the “Request Reply” icon, you must
manually respond to the sender that you have received
the message. The system will not automatically send
back a notification that the radio received such message.
Note: The “Priority” flag on a message does not imply that the
message will get higher priority over the other messages
when it is being transmitted. It is just an indication that
can be embedded into a message to let the receiver
know that the message is important.
6 When an address has been appended to the outgoing message,
press the PTT button to send your message.
OR
Press E below SAVE to save your message for sending at a
later time.
The message will be saved in the “Draft folder”. See “To Access
the Draft Folder” on page 105 for further details.
1 Press E below LIST to
use the predefined message
OR
Press on the preprogrammed
Quick Text button.
The first predefined message
appears.
QT 001/002
I’ll be late
ADDR
EDIT
BACK
94C06.book Page 102 Wednesday, June 23, 2010 11:41 AM
To Next Page
Loading...
Need help?
General
