ASTRO XTS 2500/XTS 2500I Model III 31
General Radio Operation
Mode Select Button
This feature lets you program the current zone and channel to a
Mode Select button with a long press on the Mode Select button.
After the buttons are programmed, you can return to the pre-
programmed zone and channel with a short press on the
programmed Mode Select button.
The buttons that are assigned for this feature are labeled in the
following picture.
Note: 1,2 or 3 require a qualified technician to enable as
the Mode Select buttons.
Top Side Button
Side Button 1
Side Button 2
Keypad Number
1, 2 and 3
Top Button
94C06.book Page 31 Wednesday, June 23, 2010 11:41 AM
To Next Page
Loading...
