28
General Radio Operation
Use the Preprogrammed Zone Switch
Select a Channel
Consult an authorized service technician for the right choice between
the following methods.
Use the Preprogrammed Channel Selector
Use the Menu CHAN
1 If a control on your radio has
been preprogrammed as the
Zone Switch, move the
Zone Switch to the position
for the zone you want.
Note: If the zone you selected
is unprogrammed, repeat
step 1.
2 Press h to confirm the
displayed zone and channel.
After the zone you want is
displayed, turn the
preprogrammed Channel
Selector switch to the
desired channel.
1 Press U to find CHAN.
FIRE DISP NW
UNPROGRAMMED
CHAN
94C06.book Page 28 Wednesday, June 23, 2010 11:41 AM
To Next Page
Loading...
