ASTRO XTS 2500/XTS 2500I Model III 29
General Radio Operation
Use the Menu Entry CHUP or CHDN
2 Press D, E, or F
directly below CHAN.
The display shows the
current channel name (in
this case, DISP NW) blinking
and the zone (POL), not
blinking.
3 Press U to find the channel
name you want.
OR
Use the keypad to enter the
channel number.
Note: If the channel you
selected is
unprogrammed, repeat
step 3.
4 Press h to confirm the
displayed zone and channel.
OR
Press the PTT button to
transmit on the displayed
zone/channel.
1 Press U to find CHUP and
CHDN.
POL DISP NW
POL DISP SE
UNPROGRAMMED
POL DISP SE
CHAN
94C06.book Page 29 Wednesday, June 23, 2010 11:41 AM
To Next Page
Loading...
