52
Common Radio Features
Scan
The scan feature allows you to monitor traffic on different channels by
scanning a preprogrammed list of channels. Your radio can have up
to 20 different scan lists. These lists must be preprogrammed by a
qualified technician.
You can view the scan list assigned to the currently selected channel
the same way you would view other lists. See “View a List” on
page 46.
Turn Scan On and Off
Using the Menu
1 Press U to find SCAN.
2 Press D, E, or F
directly below SCAN.
The current scan state is
displayed.
3 Press D, E, or F
directly below ON or OFF.
When scan is on, the scan
status symbol (T) is
displayed.
OR
To exit the display menu
without changing the scan
state, press h or PTT.
SCAN
SCAN OFF
ON OFF
T
SCAN ON
ON OFF
94C06.book Page 52 Wednesday, June 23, 2010 11:41 AM
To Next Page
Loading...
