2
or to Utilities and press to
select.
3
or to Radio Info and press to
select.
4
or to SW Update and press to
select.
The display shows the date and time of the latest
software update.
See Over-the-Air-Programming (OTAP) on page 85
for details on OTAP session.
Checking the RSSI Values
Your radio shows the Received Signal Strength
Indicator (RSSI) icon at the top of your display. This
feature allows you to view the RSSI values.
On the home screen, press three times and
immediately press
, all within 5 seconds.
The display shows current RSSI values. Long
press the to return to the Home Screen.
See Display Icons on page 26 for details on RSSI
icon.
Front Panel Programming (FPP)
Your radio is able to customize certain feature
parameters to enhance the use of your radio.
Entering FPP Mode
1
to access the menu.
2
or to Utilities and press to
select.
3
or to Program Radio and press
to select.
Long press
at any time to return to the
Home screen.
Editing FPP Mode Parameters
Use the following buttons as required while navigating
through the feature parameters:
•
, – Scroll through options, increase/
decrease values, or navigate vertically.
101
English
To Next Page
Loading...
Need help?
General
