Motorola DP2600 User Manual

6
Press to enable/disable the Power Up Alert
Tone.
The display shows beside Enabled.
The disappears from beside Enabled.
Setting the Tone Alert Volume Offset Level
You can adjust the Tone Alert Volume Offset level if
needed. This feature adjusts the volume of the tones/
alerts, allowing it to be higher or lower than the voice
volume.
1
to access the menu.
2
or to Utilities and press to
select.
3
or to Radio Settings and press
to select.
4
or to Tones/Alerts and press to
select.
5
or to Vol. Offset and press to
select.
6
or to the required volume value.
The radio sounds a feedback tone with each
corresponding volume value.
7 Do one of the following:
•
Press to keep the required displayed
volume value.
•
Press to exit without changing the
current volume offset settings.
• Repeat Step 6 to select another volume value.
Turning the Talk Permit Tone On or Off
You can enable and disable the Talk Permit Tone if
needed.
1
to access the menu.
2
or to Utilities and press to
select.
Advanced Features
91
English

Motorola DP2600 Specifications

General

Channels	128
Operating Temperature	-30°C to +60°C
Frequency	VHF: 136-174 MHz, UHF: 403-527 MHz
Power Output	VHF: 1-5W; UHF: 1-4W
Dimensions	122 x 56 x 36 mm (with standard battery)
Digital Protocol	DMR