2 To remove the antenna, turn the antenna
counterclockwise.
Attaching the Belt Clip
1 To attach the belt clip, align the grooves on the
clip with those on the battery and press downward
until you hear a click.
2 To remove the belt clip, press the belt clip tab
away from the battery using a key. Then slide the
clip upward and away from the radio.
Attaching the Universal Connector Cover
(Dust Cover)
The universal connector is located on the antenna
side of the radio. It is used to connect MOTOTRBO
accessories to the radio.
Insert the slanted end of the cover into the slots
above the universal connector. Press downward on
the cover to seat the dust cover properly on the
Universal Connector.
Preparing Your Radio for Use
13
English
To Next Page
Loading...