negative indicator tone until the PTT button is
released.
Talkaround
You can continue to communicate when your
repeater is not operating, or when your radio is out of
the repeater’s range but within talking range of other
radios.
This is called “talkaround”.
Note:
This feature is not applicable in Capacity Plus
and Linked Capacity Plus.
The Talkaround setting is retained even after
powering down.
You can toggle between talkaround and repeater
modes by pressing the programmed Repeater/
Talkaround button or using the radio menu as
described next.
Note:
This feature is not applicable in Citizens Band
channels that are in the same frequency.
1
to access the menu.
2
or to Utilities and press to
select.
3
or to Radio Settings and press
to select.
4
or to Talkaround and press to
select.
You can also use or
to change the selected
option.
5
Press
to enable/disable the Talkaround.
The display shows beside Enabled.
The
disappears from beside Enabled.
Monitoring Features
Monitoring a Channel
Use the Monitor feature to make sure a channel is
clear before transmitting.
Making and Receiving Calls
43
English
To Next Page
Loading...