5
or to the required contact. Press
to select.
The display shows transitional mini notice,
confirming your message is being sent.
If the message is sent, a tone sounds and the
display shows positive mini notice.
If the message is not sent, a low tone sounds and
the display shows negative mini notice.
Analog Status Update
Your radio is able to send preprogrammed messages
from the Status List indicating your current activity to
a radio contact (for 5-Tone systems) or to the
dispatcher (for MDC systems).
The last acknowledged message is kept at the top of
the Status List. The other messages are arranged in
alphanumeric order.
Sending Status Update to Predefined Contact
1
or to Status and press to select.
2
or to the required status and press
to select.
3
or to Set as Default and press
to select.
The display shows transitional mini notice,
confirming your status update is being sent.
If the status update is acknowledged, a tone
sounds and the display shows positive mini notice.
A
appears beside the acknowledged status.
If the status update is not acknowledged, a low
tone sounds and the display shows negative mini
notice. A remains beside the previous status.
For 5-Tone systems, see Setting a Default Contact on
page 52 for details on setting the default contact.
For 5-Tone systems, a PTT button press while in the
status list sends the selected status update and
returns to the Home screen to initiate a voice call.
75
English
To Next Page
Loading...
Need help?
General
