indicating the channel is free for you to respond.
Press the PTT button to respond.
If there is no voice activity for a predetermined
period of time, the call ends.
The display shows Call Ended.
Making a Phone Call with the Programmable Phone
Button
1 Press the programmed Phone button to enter into
the Phone Entry list.
2
or to the required subscriber alias or
ID, and press to select.
The LED lights up solid green. The Phone Call
icon appears in the top right corner. The first text
line shows the subscriber alias. The second text
line displays the call status.
If the call-setup is successful, the DTMF tone
sounds. You hear the dialing tone of the telephone
user. The first text line shows the subscriber alias.
The Phone Call icon remains in the top right
corner.
If call-setup is unsuccessful, a tone sounds and
the display shows Phone Call Failed. Your
radio returns to the Access Code input screen. If
the access code was preconfigured in the
Contacts list, the radio returns to the screen you
were on prior to initiating the call.
3 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
4 Press the PTT button to talk and release it to
listen.
5 To enter extra digits, if requested by the Phone
Call, press One Touch Access button. If the entry
for the One Touch Access button is empty, a
negative indicator tone sounds.
6
Press to end the call.
The display shows Ending Phone Call.
If the end-call-setup is successful, a tone sounds
and the display shows Call Ended.
If the end-call-setup is unsuccessful, your radio
returns to the Phone Call screen. Repeat Step 4 or
wait for the telephone user to end the call.
Making and Receiving Calls
41
English
To Next Page
Loading...
Need help?
General
