Radio
Con-
trols
Steps
4
or to Radio Disable
and press to select.
The display shows Radio Enable: <Subscriber
Alias or ID> and the LED lights up solid green.
2 Wait for acknowledgement.
If successful, the radio sounds a positive indicator
tone and the display shows positive mini notice.
If not successful, the radio sounds a negative
indicator tone and the display shows negative mini
notice.
Do not press during the Radio Disable
operation as you will not get an acknowledgement
message.
Radio Enable
1 Access this feature by
Radio
Con-
trols
Steps
Radio
Enable
button
1 Press the programmed Radio Ena-
ble button.
2
or to the required alias
or ID and press to select.
Radio
menu
1
to access the menu.
2
or to Contacts and
press to select. The entries are
alphabetically sorted.
3 Use one of the steps described next
to select the required subscriber
alias or ID
• Select the required alias or ID di-
rectly.
79
English
To Next Page
Loading...