This feature is not applicable in Capacity Plus and
Linked Capacity Plus.
1 Press and hold the programmed Monitor button
and listen for activity.
The Monitor icon appears on the display and the
LED lights up solid yellow. You hear radio activity
or total silence, depending on how your radio is
programmed. This indicates that the channel is in
use.
2
Wait until you hear “white noise”. This indicates
that the channel is free.
3 Press the PTT button to talk and release it to
listen.
Permanent Monitor
Use the Permanent Monitor feature to continuously
monitor a selected channel for activity.
Note:
This feature is not applicable in Capacity Plus
and Linked Capacity Plus.
1 Press the programmed Permanent Monitor
button to activate permanent monitoring of the
channel.
Radio sounds an alert tone, the LED lights up solid
yellow, and the display shows Permanent
Monitor On. The Monitor icon appears on the
display.
2 Press the programmed Permanent Monitor
button to exit Permanent Monitor mode.
Radio sounds an alert tone, the LED turns off, and
the display shows Permanent Monitor Off.
Making and Receiving Calls
44
English
To Next Page
Loading...