Motorola DS4208 - Composite Beep Mode; GS1-128 Emulation Mode for UCC;EAN Composite Codes

Symbologies 9 - 77
Composite Beep Mode
Parameter # F0h 8Eh
To select the number of decode beeps when a composite bar code is decoded, scan the appropriate bar code.
GS1-128 Emulation Mode for UCC/EAN Composite Codes
Parameter # F0h ABh
Select whether to enable or disable this mode.
NOTE Single Beep After Both are Decoded is the default for the healthcare configuration (DS4208-HC) of the
DS4208 digital scanner.
Single Beep After Both are Decoded
(00h)
*Beep as Each Code Type is Decoded
(01h)
Double Beep After Both are Decoded
(02h)
Enable GS1-128 Emulation Mode for
UCC/EAN Composite Codes
(01h)
*Disable GS1-128 Emulation Mode for
UCC/EAN Composite Codes
(00h)