4 - 38 DS4208 Digital Scanner Product Reference Guide
Transmit “No Read” Message
Parameter # 5Eh
Scan a bar code below to select whether or not to transmit a No Read message. Enable this to transmit the
characters NR when a successful decode does not occur before trigger release or the
Decode Session Timeout
expires. See Decode Session Timeout on page 4-14. Disable this to send nothing to the host if a symbol does not
decode.
NOTE If you enable Enable No Read, and also enable Symbol Code ID Character or AIM Code ID Character for
Transmit Code ID Character on page 4-34, the digital scanner appends the code ID for Code 39 to the NR
message.
Enable No Read
(01h)
* Disable No Read
(00h)
To Next Page
Loading...
