Motorola DS4208 - Parameter Bar Code Scanning; Beeper Preferences; Beep after Good Decode; Enable

User Preferences & Miscellaneous Digital Scanner Options 4 - 5
Parameter Bar Code Scanning
Parameter # ECh
To disable the decoding of parameter bar codes, including the Set Defaults parameter bar codes, scan the
Disable Parameter Scanning bar code below. To enable decoding of parameter bar codes, scan Enable
Parameter Scanning.
Beeper Preferences
Beep After Good Decode
Parameter # 38h
Scan a bar code below to select whether or not the digital scanner beeps after a good decode. If selecting
Do Not Beep After Good Decode, the beeper still operates during parameter menu scanning and to
indicate error conditions.
* Enable Parameter Bar Code Scanning
(01h)
Disable Parameter Bar Code Scanning
(00h)
* Beep After Good Decode
(Enable)
(01h)
Do Not Beep After Good Decode
(Disable)
(00h)