Motorola DS4208 - Continuous Bar Code Read; Unique Bar Code Reporting

User Preferences & Miscellaneous Digital Scanner Options 4 - 13
Continuous Bar Code Read
Parameter # F1h 89h
Enable this to report every bar code while the trigger is pressed.
Unique Bar Code Reporting
Parameter # F1h D3h
Enable this to report only unique bar codes while the trigger is pressed. This option only applies when Continuous
Bar Code Read
is enabled.
NOTE Motorola strongly recommends enabling Picklist Mode on page 4-12 with this feature. Disabling Picklist
Mode can cause accidental decodes when more than one bar code is in the engine's field of view.
* Disable Continuous Bar Code Read
(00h)
Enable Continuous Bar Code Read
(01h)
* Disable Continuous Bar Code Read Uniqueness
(00h)
Enable Continuous Bar Code Read Uniqueness
(01h)