Motorola DS4208 - Data Matrix; Data Matrix Inverse

9 - 80 DS4208 Digital Scanner Product Reference Guide
Data Matrix
Parameter # F0h 24h
To enable or disable Data Matrix, scan the appropriate bar code below.
Data Matrix Inverse
Parameter # F1h 4Ch
This parameter sets the Data Matrix inverse decoder setting. Options are:
• Regular Only - the digital scanner decodes regular Data Matrix bar codes only.
• Inverse Only - the digital scanner decodes inverse Data Matrix bar codes only.
• Inverse Autodetect - the digital scanner decodes both regular and inverse Data Matrix bar codes.
*Enable Data Matrix
(01h)
Disable Data Matrix
(00h)
NOTE Inverse Autodetect is the default for the healthcare configuration (DS4208-HC) of the DS4208 digital
scanner.
*Regular
(00h)
Inverse Only
(01h)
Inverse Autodetect
(02h)