Standard Default Parameters A - 5
Bookland EAN 53h Disable
9-11
Bookland ISBN Format F1h 40h ISBN-10
9-12
Decode UPC/EAN/JAN Supplementals
(2 and 5 digits)
10h Ignore
9-14
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
F1h 43h
F1h 44h
N/A
9-16
UPC/EAN/JAN Supplemental Redundancy 50h 10
9-16
Decode UPC/EAN/JAN Supplemental AIM ID F1h A0h Combined
9-17
Transmit UPC-A Check Digit 28h Enable
9-18
Transmit UPC-E Check Digit 29h Enable
9-18
Transmit UPC-E1 Check Digit 2Ah Enable
9-19
UPC-A Preamble 22h System Character
9-19
UPC-E Preamble 23h System Character
9-20
UPC-E1 Preamble 24h System Character
9-21
Convert UPC-E to A 25h Disable
9-22
Convert UPC-E1 to A 26h Disable
9-22
EAN-8/JAN-8 Extend 27h Disable
9-23
UCC Coupon Extended Code 55h Disable
9-23
Coupon Report F1h DAh New Coupon Symbols
9-24
ISSN EAN F1h 69h Enable
9-25
Code 128
Code 128 08h Enable
9-26
Set Length(s) for Code 128 D1h, D2h Any Length
9-26
GS1-128 (formerly UCC/EAN-128) 0Eh Enable
9-27
ISBT 128 54h Enable
9-28
ISBT Concatenation F1h 41h Disable
9-29
Check ISBT Table F1h 42h Enable
9-30
ISBT Concatenation Redundancy DFh 10
9-30
Table A-1
Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.
To Next Page
Loading...
