Motorola LI4278 LINEAR IMAGER Product Reference Guide

STANDARD DEFAULT PARAMETERS A - 3
Timeout Between Decodes, Same Symbol 0.5 Sec 5-19
Timeout Between Decodes, Different Symbols 0.2 Sec 5-19
Decoding Illumination Enable 5-20
Miscellaneous Options
Transmit Code ID Character None 5-21
Prefix Value 7013 <CR><LF> 5-22
Suffix 1 Value
Suffix 2 Value
7013 <CR><LF> 5-22
Scan Data Transmission Format Data as is 5-23
FN1 Substitution Values Set 5-24
Transmit “No Read” Message Disable 5-25
Keyboard Wedge Host Parameters
Keyboard Wedge Host Type IBM PC/AT& IBM PC
Compatibles
1
6-4
Country Types (Country Codes) North American 6-5
Ignore Unknown Characters Send 6-7
Keystroke Delay No Delay 6-7
Intra-Keystroke Delay Disable 6-8
Alternate Numeric Keypad Emulation Disable 6-8
Caps Lock On Disable 6-9
Convert Wedge Data No Convert 6-10
Caps Lock Override Disable 6-9
Function Key Mapping Disable 6-10
FN1 Substitution Disable 6-10
Send and Make Break Send 6-11
RS-232 Host Parameters
RS-232 Host Types Standard 7-6
Baud Rate 9600 7-8
Parity Type None 7-9
Stop Bit Select 1 Stop Bit 7-9
Table A-1 Standard Default Parameters Table (Continued)
Parameter Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.

Motorola LI4278 LINEAR IMAGER Specifications

General

Scan Rate	547 scans per second
Decode Capability	1D barcodes
Scan Pattern	Single line
Light Source	LED
IP Rating	IP42
Scanner Type	Linear Imager
Battery	Rechargeable Li-ion battery
Drop Specification	1.8 m (6 ft) drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Technology	Linear Imager
Radio Range	Up to 100 m (330 ft) in open air
Interface	USB, RS232, Keyboard Wedge
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% (non-condensing)
Weight	7.9 oz./224 g
Dimensions	9.8 cm H x 7 cm W x 18.6 cm L (3.8 in H x 2.7 in W x 7.3 in L)